What is the Genie 2 on DirecTV?
DIRECTV’s Genie 2 offers a sophisticated integration and enhanced customer experience. The Genie 2 does not need a connection or output to a TV. It services Genie clients like Genie Mini and Wireless Genie Mini receivers. Below is information on Genie 2 features and how to fix common errors.
How far away should I be from my wireless Genie Mini?
4 feet away or more from your Wireless Genie Mini device (can’t be farther than 85 feet away). The Wireless Video Bridge is not behind a TV or other blocking surface. Verify the Wireless Genie Mini light is green. If it’s yellow, the location of the Wireless Genie Mini may be preventing a good signal.
Why won’t my wireless Genie Mini Connect to my TV?
1 Verify the Wireless Genie Mini light is green. If it’s yellow, the location of the Wireless Genie Mini may be preventing a good signal. 2 Make sure the HDMI connection to the TV is secure. 3 Check that the TV input selection. 4 Try changing the channels. 5 Press and hold the red reset button located near the access card to reboot the system.
How many Genie HD DVRs can I connect to my TV?
Up to eight Genie Minis can connect to a single Genie HD DVR. Additional equipment required. Additional & Advanced Receiver fees apply. Limit three remote viewings at a time. HDMI Control: Your receiver will automatically set your TV to the correct input when it exists the stand-by mode—so you don’t have to!
https://www.youtube.com/watch?v=h19Zm-wuqNg
How do I program my Genie remote to my DVR?
The directions vary for different devices. Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. Press and hold the MUTE and ENTER buttons while continuing to point the remote at a Genie device. Stop when the green light at the top of the remote blinks twice.
How do I use my DirecTV remote control?
Heads up: The DIRECTV remote powers on your TV and controls the volume while watching DIRECTV. To adjust TV settings or access third-party apps, use the remote control that came with your TV. Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini.
How do I enter the channel up code on my Genie?
Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. Press and hold the MUTE and SELECT buttons while continuing to point the remote at a Genie device. Stop when the green light at the top of the remote blinks twice. Use the buttons on your Genie remote to enter code 961. Press the channel up button once. Press Enter.