Was ist ein Dante Interface?
DANTE (engl. Abkürzung für Digital Audio Network Through Ethernet; deutsch: Digitales Audionetzwerk über Ethernet) ist eine Kombination aus Hardware, Software und einem Netzwerkprotokoll, die es erlaubt, mehrere Kanäle unkomprimierter digitaler Audiosignale mit geringer Latenzzeit über ein Netzwerkkabel zu übertragen.
Wie funktioniert ein Dante Netzwerk?
Die Dante-Hard- oder Software in einem Gerät nimmt digitales Audio auf und „paketiert“ es. Das Audio wird segmentiert und in IP-Pakete (Internet Protocol) verpackt, die für die Übertragung über ein Standard-IP-Netzwerk geeignet sind.
Wie viele Kanäle kann Dante?
Hersteller können Dante-Audio in Form von Hardwaremodulen, Chips, Referenzdesigns und Software erwerben, die in Produkte von Einkanalmikrofonen bis hin zu massiven Rundfunkkonsolen mit über 500 Kanälen integriert werden können, während das Dante-AV-Modul dieselbe Funktionalität auch für Videosignale bietet.
How does QoS work in Dante networks?
QoS only helps against fluctuating non-audio data. Nonetheless, it is standard for QoS to be used in Dante networks. A switch should allow four (or more) so-called queues to be set up and the prioritization to be changed manually using the DSCP table.
Is it easy to implement the Dante network?
Whether you’re new to networking or a seasoned IT professional, the information below will be easy to implement. The Dante network requires the use of at least one Gigabit Ethernet switch. In larger installations multiple switches will be needed.
How do I change the default VLAN Query interval for Dante devices?
Dante devices use mDNS multicast packets for discovering their devices. You can configure this using the web interface or using CLI. If you’re using the default VLAN (1) with your Dante/QSC device, skip to Change the Query Interval to 30 . Navigate to Switching > VLAN > VLAN Configuration.
Do I need to enable IGMP snooping for my Dante device?
If your Dante audio device is using multicast service, you’ll need to have IGMP snooping enabled on the switch. NETGEAR M4300 has IGMP snooping enabled by default in VLAN 1 that it is not necessary to enable it if the Dante device is using VLAN 1.