Warum gibt es kein RAID 2?

Warum gibt es kein RAID 2?

»RAID 2« wird derzeit von keinem Hersteller am Markt unterstützt und bietet vor allem im Vergleich zu »RAID 5« ein unakzeptables Preis-/Leistungsverhältnis. Ein RAID-2-Verbund besteht aus zwei oder mehr Datenplatten und einer oder mehr ECC-Platten (»Error Correction Code«).

Was versteht man unter einem RAID Level?

Unter dem Begriff RAID werden diverse Konfigurationen gekoppelter Festplatten zusammengefasst. Die verschiedenen Konfigurationen werden als Level mit einer nachfolgenden Ziffer bezeichnet. Ein Festplatten-Controller steuert die Verteilung der Daten auf die Level.

Wie viele Platten können bei RAID 10 ausfallen?

Fazit: Bei RAID 10 mit vielen Festplatten können auch mehr als 2 Festplatten ausfallen. Dieser Typ bietet vor allem gesteigerte Sicherheit und eine recht schnelle Wiederherstellung. Dieser RAID-Typ wird insbesondere im professionellen Umfeld genutzt.

What is RAID-DP protection and how does it work?

What RAID-DP protection is. RAID-DP provides double-parity disk protection when the following conditions occur: There is a single-disk failure or double-disk failure within a RAID group. There are media errors on a block when Data ONTAP is attempting to reconstruct a failed disk. The minimum number of disks in a RAID-DP group is three:…

What is NetApp RAID-DP technology?

NetApp RAID-DP Technology RAID-DP is a double parity protection in a RAID group. RAID-DP on NetApp is supported using 14 Data Drives and 2 Parity Disk. A traditional RAID 4 is implemented with horizontal parity structure.

What is the difference between RAID 5 and F1?

The layout of RAID F1 is based on RAID 5. The difference between these two RAID types is that RAID F1 has an additional parity block per cycle. In the illustration below, the blocks with “P” stand for the parity blocks, and the rest are data blocks.

What happens if there is a double-disk failure in a raid?

If there is a double-disk failure, Data ONTAP replaces the failed disks in the RAID group with two spare disks and uses the double-parity data to reconstruct the data of the failed disks on the replacement disks. RAID-DP is the default RAID type for all aggregates.

Beginne damit, deinen Suchbegriff oben einzugeben und drücke Enter für die Suche. Drücke ESC, um abzubrechen.

Zurück nach oben