Warum ist der WLAN Frame größer als der Ethernet-Frame?
Das Ethernet-Frame kann deutlich länger sein als bei Fast-Ethernet. Während ein normales Ethernet-Frame maximal 1518 Byte haben darf, darf das Ethernet-Frame über WLAN 2304 Byte betragen. Bei längeren Frames lassen sich die Anzahl der Header reduzieren und so die Übertragungsrate erhöhen.
Welche Adressen befinden sich in einem Ethernet-Frame?
Das ist ein Bitfolge, die das Ethernet-Frame einleitet. In einem Frame werden neben den Daten (Datenpakete aus den oberen Protokoll-Schichten) auch Zieladresse, Quelladresse und Steuerinformationen verpackt. Als Adressen dienen MAC-Adressen.
Wie lautet die Ziel MAC Adresse eines Broadcast Ethernet Frames?
Die MAC-Adresse, bei der alle 48 Bits auf 1 gesetzt sind ( ff-ff-ff-ff-ff-ff ), wird als Broadcast-Adresse verwendet, die an alle Geräte in einem LAN gesendet wird. Broadcast-Frames werden ohne besondere Maßnahmen nicht in ein anderes LAN übertragen.
Wie wird bei der Übertragung die maximale Größe eines Rahmens Frames definiert?
Standardmäßig ist der Ethernet-Datenframe maximal 1518 Byte groß, von denen 18 Byte für den Header und Trailer reserviert sind. Bei Verwendung von IEEE 802.1Q-Tags (für VLAN oder Priorisierung) wird der Header um vier Byte erweitert und das Frame damit maximal 1522 Byte groß.
Warum MAC Adressen?
Die Media Access Control Adresse (MAC-Adresse) ist eine einzigartige Hardwareadresse jedes Netzwerkadapters, wodurch jedes Gerät eindeutig identifizierbar ist. Nicht nur Geräte der Firma Apple haben eine MAC-Adresse, sondern jeder Rechner in einem Netzwerk.
Wie ist ein Ethernet 2 Frame aufgebaut?
Im Ethernet-II-Frame wird das „Tag“-Feld vor dem „Type“-Feld implementiert und belegt 4 Byte. Dadurch erhöht sich auch die Mindestgröße des Ethernet-II-Frames um 4 Byte. Die klassische Framestruktur von Ethernet 802.3 Tagged. Das Tag-Field enthält wichtige Informationen für die VLAN-Einbindung.
What’s the difference between Ethernet and 802.11 framing?
Ethernet framing is a simple matter: add a preamble, some addressing information, and tack on a frame check at the end. 802.11 framing is much more involved because the wireless medium requires several management features and corresponding frame types not found in wired networks. Three major frame types exist.
How does a MAC frame work in 802.11?
In the IEEE 802.11 wireless LAN protocols (such as Wi-Fi), a MAC frame is constructed of common fields (which are present in all types of frames) and specific fields (present in certain cases, depending on the type and subtype specified in the first octet of the frame). The very first two octets transmitted by a station is the Frame Control.
What is the frame control field in 802.11?
802.11 Frame Control Field The first three fields (Protocol Version, Type and Subtype) in the Frame Control field are always present. The fields, in their order of appearance in transmission, are: Protocol Version (currently is 0)
When to use one bit in an 802.11 data frame?
It is one bit in length and is used for two purposes: It is set to 1 in a non- QoS data frame transmitted by a non-QoS WLAN station to indicate the frame being transmitted is using Strictly-Ordered service class (this use is obsolete and will be removed from the future 802.11 Standard).