Wie viele Bits benötigt ein Song auf einer Audio CD?
Für die Musikproduktion ist das Bit als Ausdruck für den möglichen Informationsgehalt (Informationstiefe) eines Abtastpunktes aber viel wichtiger. Diese Angabe findest du zum Beispiel bei der Audio-CD (16 Bit), beim Aufnehmen (24 Bit) und während der Bearbeitung (32 oder 64 Bit Gleitkomma-Werte) von Musik.
Was ist 48 kHz?
Früher hieß es, Audio-CD-Standard ist 44,1 kHz, also macht es Sinn mit 44,1 kHz zu produzieren. Wenn man explizit für den Videobereich Audio produziert hat, dann hat eher 48 kHz Sinn gemacht. Später war es dann möglich auch mit 96 kHz zu produzieren…
Warum 44 1 kHz?
Eine CD unterstützt Signale, die mit einer Abtastrate von 44.100 Hz oder eben 44,1 kHz digitalisiert wurden. Das entspricht 44.100 Samples pro Sekunde. Aus diesem leitet sich ab, dass die Abtastfrequenz mindestens doppelt so hoch sein muss wie die höchste Frequenz des zu digitalisierenden Signals.
Welche Datenrate hat eine CD?
Wie unterscheidet sich High-Resolution Audio von CDs/MP3s? Die Bitrate bzw. die Menge der pro Sekunde übertragenen Daten ist bei High-Resolution Audio (9.216 kbit/s) ca. sieben Mal höher als bei CDs (1.411 kbit/s) und fast 29 Mal höher als bei MP3s (320 kbit/s).
Is 32 bit audio better than 24 bit audio?
I agree with both @Speedskater and @dwinnert, 32 bit is not important for the consumer listener but 24 bit can be useful for the person processing and mixing tracks as 24 bit gives extra headroom for the person working on the audio. Good read here for more specifics.
Do you prefer 16 bit or 13 bit audio files?
Even 24 bit playback doesn’t give improvement in consumer audio. 16 bit audio provides more than enough dynamic range (and detail). Optimally used 13 bits is enough for even the most demanding listening. 2. It’s completely marketing gimmicks.
What is the difference between 24 bit and 32 bit DAC?
With 24bit (or 32bit) the error/noise starts at about -140dB and even the accumulated noise (error) from say 10 processors will still end up being well below the noise floor of any DAC and therefore be inaudible. So, 24 or 32bit would be obviously better in the case of several successive digital processing steps.
What is the difference between a 24bit and a 32bit float?
When you hear about 32bit, they’re talking about 32bit float. A 32bit float word essentially comprises of 8bits reserved for the exponent and the remaining 24bits is the mantissa, where the actual audio data is stored. A 24bit fixed word does not have any bits reserved for an exponent and it’s all effectively audio data.